Product Specifications

CTA Wheel Stops

CTA provides this specification with the intention of assisting architects in specifying CTA products. CTA encourages architects to copy and paste this specification in its entirety. All other use of this information is forbidden by copyright.

Specification of CTA Wheel Stops:

Product: Wheel Stops shall be manufactured by CTA Australia Pty Ltd, product code [product code] in solid rubber with contrasting and reflective bright yellow chevrons panels.
Certification: CTA will provide a compliance guarantee with all CTA Wheel Stops indicating they comply with the relevant standards AS2890.1
Installation: Where CTA is contracted to install the products, installation shall be performed in accordance with the manufacturers detailed installation instructions and in accordance with the relevant offsets etc. as defined in the standards.
Material Data Safety Sheets: In accordance with safe practice, where CTA is contracted to install the products, CTA will provide a Material Safety Data Sheet (MSDS) for all materials brought on site, to the site manager, prior to commencement of works.
Warranty and Customer Care program: CTA shall provide a product/installation Warranty, prior to the commencement of works. Upon request, CTA shall submit an ongoing product maintenance program to assist the asset manager in maintaining a safe and compliant installation.
Contact Details: CTA Australia Pty Ltd – Phone 1300 282 282

Item No.	Product Part Number	Product Description	Overall Dimensions (Nominal)	Image
1.	CPWS112/160-L	1800mm long wheel stop designed to stop both tires and position vehicle within parking bays. Have diagonal reflective yellow strips.	Height: 100mm Width: 150mm Length: 1830mm
	CPWS112/160-S	1650mm long wheel stop designed to position vehicle within parking bays. Have diagonal reflective yellow strips.	Height: 100mm Width: 150mm Length: 1650mm

CTA Bike Racks and Holding Rails

CTA provides this specification with the intention of assisting architects in specifying CTA products. CTA encourages architects to copy and paste this specification in its entirety. All other use of this information is forbidden by copyright.

Specification of CTA Bike Racks and Holding Rails:

Product: Bike Racks and/or Holding Rails shall be manufactured by CTA Australia Pty Ltd, product code [product code] in polished finish with [above ground flange/ in ground cast] fixing and manufactured from 50mm diameter x 2mm wall thickness marine grade stainless steel.
Certification: CTA will provide a compliance guarantee with all CTA Bike and Holding Rails indicating they comply with the relevant AustRoad Part 14 Guidelines and AS2890.3 – 1993 Bicycle Parking facilitie.
Installation: Where CTA is contracted to install the products, installation shall be performed in accordance with the manufacturers detailed installation instructions and in accordance with the relevant offsets etc. As defined in the standards.
Material Data Safety Sheets: In accordance with safe practice, where CTA is contracted to install the products, CTA will provide a Material Safety Data Sheet (MSDS) for all materials brought on site, to the site manager, prior to commencement of works.
Warranty and Customer Care program: CTA shall provide a product/installation Warranty, prior to the commencement of works. Upon request, CTA shall submit an ongoing product maintenance program to assist the asset manager in maintaining a safe and compliant installation.
Contact Details: CTA Australia Pty Ltd – Phone 1300 282 282

Item No.	Product Part Number	Product Description	Overall Dimensions (Nominal)	Image
1.	BRU001 flanged BRU002 In-situ	Inverted “U” shaped, available with fixing flange or 350mm long extended leg to cast in-situ.	Height: 900mm Width: 900mm
2.	HRS001 flanged HRS002 In-situ	Square shaped, available with fixing flange or 350mm long extended leg to cast in-situ.	Height: 1000mm Width: 1200mm
3.	HRSRT001 flanged HRSRT002 In-situ	Square shaped with reflective tape in accordance with AS1906.1-Class 1, available with fixing flange or 350mm long extended leg to cast in-situ.	Height: 1000mm Width: 1200mm

CTA Skate Board Deterrents

CTA provides this specification with the intention of assisting architects in specifying CTA products. CTA encourages architects to copy and paste this specification in its entirety. All other use of this information is forbidden by copyright.

Specification of CTA Skate Board Deterrents:

Product: Skate Board Deterrents shall be manufactured by CTA Australia Pty Ltd, product code [product code] in polished finish with spigot fixing system and manufactured from 316 marine grade stainless steel.
Certification: CTA will provide a compliance guarantee with all CTA Skate Board Deterrents indicating they comply with the relevant CTA Specifications.
Installation: Where CTA is contracted to install the products, installation shall be performed in accordance with the manufacturers detailed installation instructions and in accordance with the offsets as denoted in the CTA Installation Instructions.
Material Data Safety Sheets: In accordance with safe practice, where CTA is contracted to install the products, CTA will provide a Material Safety Data Sheet (MSDS) for all materials brought on site, to the site manager, prior to commencement of works.
Warranty and Customer Care program: CTA shall provide a product/installation Warranty, prior to the commencement of works. Upon request, CTA shall submit an ongoing product maintenance program to assist the asset manager in maintaining a safe and compliant installation.
Contact Details: CTA Australia Pty Ltd – Phone 1300 282 282

Item No.	Product Part Number	Product Description	Overall Dimensions (Nominal)	Image
1.	CPSBDSN002	Square nosed	Body length: 110mm Riser: 40mm Width: 16mm Spigot: 30mm long
2.	CPSBDBN002	Bull nosed	Body length: 110mm Riser: 25mm Width: 16mm Spigot: 30mm long
3.	CPSBDCK002	Cylindrical	Diameter: 20mm Height: 10mm Spigot: 30mm long
4.	CPSBDMK002	Mushroom	Diameter: 20mm Height: 10mm Spigot: 30mm long